PRESS REDUCING VALVE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register.
Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”.
Available three models:
- with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases,
- FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc..,
Models according pressure:
- Low pressure: 682/482mGFO-LP EPDM and FKM,
- Standard pressure: 682/482mGFO-SP EPDM and FKM,
- High pressure: 682/482mGFO-HP EPDM and FKM.
Models according pressure range
Mesh sizes:
- G 1/2” to G 1-1/4” = 0.6 mm,
- DN40 and DN50 = 0.75 mm.
Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel.
Primary pressure: up to 30 bar,
Secondary pressure: 0.5 - 15 bar.
All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure).